Enterprise's aim
 → Enterprise's aim
  clients' demand is our pursue
 → enterprise spirit
  be determinedly aggressive create good quality
  be wholeheartedly united, re-create resplendence of our company
 → enterprise ideal
  service start from minuteness
product list
Crystallization device copper set
resistance welds and uses one grade of materials of electricity
Zinc wear resistant alloy
online information

  address: Xinfeng Town, Dantu District, Zhenjiang City

  Tel: 0511-83321008

  Fax: 0511-85898171

  Linkman: Yin Wang-qing
 
 product
 
resistance welds and uses one grade of materials of electricity
C18200 Electrode one
C18200 Electrode plate
C1800 electrode enclosing
C1800 electrode one is excellent
“mibahe” Weld the electromechanics very much and the small seat
“mibahe” Big seat of welder

Every shape electrode
Every shape electrode
Every shape electrode
Miebach welder holder
Bearings with inlays
Mash-welding electrodes
Trade mark
The affiliated alloy is
Performance （≥）
Hardness
Conductive rate
Soften temperature
Tensile strength
XF-1
Cu-Be
200
50
550
750
XF-2
Cu-Be
230
55
550
700
XF-3
Cu-Co
230
45
550
750
XF-4
Cu-Ni
220
45
500
650
XF-5
Cu-Ni
130
60
475
600
XF-6
Cu-Cr
140
75
500
450
XF-7
Cu-Re
100
95
200
370
 
    There is copper alloy of high,electric conductivity good,heat-resisting comprehensive performance of decreasing etc.of intensity concurrently,Used in the stainless steel,heat-resisting steel and resistance of other alloy panel and weld the electricalmachinery,Used in carbon steel and low ,flash of light very much electric welding of steel,alloy of China,too.XF-1 is that the manufacture level casts the ideal alloy of set of copper of crystallization device in succession.
    There are higher mechanical performance and good electric conduction,get and is wiped,has hotly,wearresistingly in XF-1,XF-2 the same use.Have higher machinery,have moderate electric conduction and heat-resisting performance,use for resistance weld equipment receive stress heavy electric conductivity part concurrently.
    There are higher electric conductivity and intensity,is used in the resistance andreceive the electric conductivity part with larger strength while welding the equipment.have good electric conduction heat conduction ability,the higher intensity and hardness,and have better resisting the visedity of melting,Anti-oxidant,weld the electrode alloy that the low carbon steel used far and wide.
    Have better electric conductivity as the electrode alloy ,is used in the aluminium,weld electrodes in magnesium alloy and resistance of the copper alloy.

all rights reserved by Zhenjiang City Wangsheng Alloy Materials Co.,Ltd